MATERIALS

• PBA
• Acrylic paints
• Multiple pictures with suitable drawings or a cash map
• alcoholic fluid
• universal

INSTRUMENTS

• Manicure scissors
• flat synthetic diameter
• synthetic without abrasion
• Pelofian
• thin surgery gloves
• Pencarton
• Paper cloth
• Wat tampons

Step 1

The motives chosen must be cut out of the decoration card by manicure scissors at the contour. In hard-to-reach places and thin moments, the background may be left in order not to damage the image. If you're dealing with the napkin, after cutting, all her white layers should be removed, leaving only the top layer with the drawing. We have to work with him.

Step 2

The surface should be dehydrated before a bottle of glue is applied. I mean, wipe out a cotton tampon, mopped in liquids with high alcohol content. There are special glues to devastate, but we will not use them: they are expensive. So we'll use the usual PWA glue, scattered water. About the cafeteria spoon of glue, we need to unleash the water by adding it to a little while before it buys a consistant liquid tag.

Step 3

On the one hand, the bottle of brass will be decorated, on the other hand, directly. First, we're doing reverse decoupling. Put a face-to-face picture on the bottle. Flue synthetic brush, put an average drop of glue in the middle of the drawing. We're starting to distribute glue from the center to the edges of the appendix. Attention! The point is, don't make spicy smears so you don't break a thin and glued napkin.

Step 4

As they approach the edges of the appliciation, they start to accumulating, there's a bleed. They need to be screamed carefully with a wrist or finger. If there's too much glue left on the surface, you can wipe them out with the usual wattt tampon. To make the decay look brighter, when the glue is dry, put on top of the pictures of white layers, acrylic paint.