The best stage of preparation for the summer is a bijutheria reserve. You can finally wear bright earrings, bracelets, collars and corns. Even the beach doesn't rule out the presence of jewelry, because it is now that all of our indigents are well-known and fully attracted to the attention of others.
For this reason, this " barbed family " has been established. The earrings and the unusual countervailing brasser will not just add your image or highlight the color of the beach, but they will also make the brighter, positive and warmer every summer day.
The establishment of a bracelet requires a little preparatory work. First, we need to make a statue where we really have to go through this bracelet.
It will require very little material for its manufacture:
:: Clothing of plastic bottle (e middle);
• Any board preferably with the same sides and not very long (through from the old closet, seat from the unsuitable chair, etc.);
• nails;
mild;
∙ scissors.
The plastic mode is not wide, but rather long lanes. Then we put these things together in half (in length), making them more precise.
Next, we attach plastic parts on the two opposite sides of the board, hitting each nail.
Now we're making stacks of manicure scissors, so we cut the plastic every 3-4 mm.
Next step: preparation of materials bracelet♪ Exactly:
• A small biser of required flowers (green, white, black, red);
:: A thin needle with a small ear;
∙ Sewing silk thread (No. 30);
diagrams.
It's better to print it so it's convenient to celebrate every row that's gone.
Now we pull the strings by wearing them in the hinges opposite each other. For this diagram, 7 threads need to be tightened so that each of the 6 boos can be fixed on both sides.
It is then necessary to attach the working thread to the first tension. Retreat 8-10 cm from the plastic edge and secure the thread.
There is no need to worry if the threads are disproportionate or that some rows have a different width. All of them shall be levelled after the first-row bush is fixed (size).
Lower the beads, according to the top-down pattern.
The needle should be tightened and put bushers in the narrow space between each of the two " trains " .
Now, we've got to re-record the thread through a tightly placed row. Only the tension must be underneath this thread, or we'll just pull it back and the basser's going to sleep.